Amptweaker Tight Metal Pro elektro gitar distortion efekt pedalı

Amptweaker Tight Metal Pro Distortion
Since introducing the popular TightMetal™ distortion pedal in 2011, Amptweaker™ has received many requests for a two button version. Unlike most distortion pedals with boost, the TightMetal Pro includes 2 Boost knobs, one before and one after the distortion.....so it’s easy to boost the gain AND volume, for the perfect solo tone. There’s also a Midboost button that works with the output Boost knob, to help solos cut through the mix.

We also polled many customers who didn’t like the TightMetal, to find out what tone changes could be offered to reign in those other metal tones. The result is the Smooth Edge switch which cuts the high end sizzle for a warmer edge, and 2 Fat switches allow either the normal or Boosted tones to have a thicker attack with a bit more compression. There's also a High Gain switch to select between Vintage sounding metal or heavier modern metal gain. The added three band EQ allows for much tonal variation, with its Thrash button for more traditional deeper scooped mids. Our standard noise gate from the original TightMetal is also included, with the hard stopping Chomp setting to help keep the rhythm as tight as possible.....especially when doing very quick riffs with a lot of palm-muted stops. Internal adjustments allow for tweaking the gate.

Amptweaker pedals are known for effects loops, and this one has 3: a universal loop, another active with the boost, and our popular SideTrak loop which activates when the pedal is OFF, to automatically shut off clean effects.

It can be used to add a compressor, chorus or chain of effects that only works when you play clean, or to switch to another distortion pedal to use for an alternate rhythm sound...all without having to hit more than one switch....it’s like having a built-in A/B box. A green LED alternates with the normal red one to indicate that the loop is active when the pedal is bypassed.

Another cool SideTrak trick is that if you only plug in the SideTrak Send, and don't plug in the Return, then that Sent dry signal can be sent to another amp.....meaning you could have the FatRock going through a 412 halfstack while sending the clean tone to a Twin or some other clean amp. All this ability comes from two simple jacks on the side of the pedal!

Amptweaker Tight Metal Pro Distortion Features:
Dual Lit Boost controls via Boost footswitch
3 Band EQ, w/ Smooth Edge sw. and Thrash sw.
3 effects loops....Universal, Boost with Pre/Post switches, and the SideTrak loop that works when the pedal is OFF! Patch in clean effects
Gain, Tight & Volume Controls
High Gain switch for heavier tones, off for more vintage metal tones
Noise Gate switch with Chomp™ setting for quick stops, with internal adjustment, tracks gain
Added adjustable internal input noise gate for even more gating
Mid switch with Thrash setting
Mid Boost switch tweaks Boost similar to TightRock™
Internal Fat switches for warmer Rhythm and/or Boost tones
Can be used as a preamp, or into a clean channel
LED lit knobs when using a power supply
Battery disconnect switch with red indicator
Runs on 9V-18V batteries or supplies–like 'variacing' your amp up and down, or similar to 50W versus 100W tone